Products Pulse Test Instruments Schonstedt The Schonstedt XTpc
The Schonstedt XTpc
The XTpc features simple one hand operation with all controls in easy reach of your thumb. The controls and the LCD display area are large and easy to understand. Clear direction arrows facilitate easy locating and foolproof centering.
The XTpc operates in passive mode, three different active modes (conductive, inductive and clamp), and a sonde mode.
This extremely versatile locator also features single button depth calculation. Simply place the receiver directly over the target and press the depth button.
The XTPC is made in two frequencies. In general, 82kHz is useful in tracing gas and water lines while 33kHz is a better choice for tracing electrical lines. You select a single frequency before purchase.
XTpc Features
- Operates on 33kHz or 82 kHz Frequency mode
- Passive detection of 50Hz or 60Hz, sonde or cathodic frequency (optional)
- One button depth measurement
- Digital readout display of signal strength (peak)
- LCD displays left, right and "on-target" indications (null)
- Transmitter 8-Hours operational battery life (intermittent usage)
- Audio & Visual Output
- Battery & Sensitivity Indicators
- Operates on a passive mode, three different modes (conductive, inductive and clamp), and a sonde mode.
- Auto Transmitter Power off
- Ergonomic & lightweight
- Smallest for easy storage
- 3-year warranty
SPECIFICATIONS:
XTpc Specifications
Receiver
| Operating Frequency: | 82kHz or 33kHz |
Battery |
9 V Alkaline single battery |
| Battery Life: | 18 hours intermittent use |
| Audio Output: | 10 - 3000 Hz determined by signal strength |
| Weight (incl. batteries): | Under 2.8 lbs |
| Operating Temp: | -4°F to 140°F (-20°C to 70°C) |
| Overal Dimensions: | Closed: 17.5 in x 3 in x 8.5 in (44 cm x 7.6 cm x 21.5 cm) Extended: 27.7 in x 3 in x 8.5 in (70 cm x 7.6 cm x 21.5 cm) |
| Max. Depth Capability: | Approximately 19' (5.8 m) |
Transmitter
| Operating Frequency: | 82kHz or 33kHz |
Output Power: |
Maximum 1-watt allowed under FCC at 82kHz; 1.8-watt at 33kHz |
| Battery Type: | Rechargeable NiMH pack (7.2 V) |
| Battery Life: | 8 hours intermittent operation |
| Chargin: | Smart charger powered by AC supply or vehicle supply |
| Outputs/Inputs: | Circular "smart" connector to: |
| Weight (incl. batteries): | Under 1.5 lbs |
| Operating Temp: | -4°F to 140°F (-20°C to 70°C) |
XTpc Standard Equipment
The XTpc comes with an extensive package of standard equipment including:
- Receiver & Transmitter
- Holster (p/n: PC10012)
- Conductive Clip Assembly (p/n: PC70000) which includes Standard Conductive Clips -- C91010 (Red) and C91011 (Black)
- Hard Carrying Case (p/n: PC10100)
- Ground Stake (p/n: 208263)
- Auto Adapter for Transmitter
- Main Charging System (Coverter, Power Supply & Cord) for Transmitter
XTpc Accessories
The following accessories are available to meet every locating need.
- Inductive Antenna (p/n: PC20010)Standard Headset (p/n: XT40000)
- Noise Canceling Headphones (p/n: TBA)
- 3" Inductive Signal Clamp (p/n: PC60000)
- 5" Inductive Signal Clamp (p/n: PC60001)
- 7" Inductive Signal Clamp (p/n: PC60002)
- Small Heavy Duty (p/n: TM70001-1 (black) &/or p/n: TM70001-2 (red)
- Large Heavy Duty (p/n: TM70002-1 (black) &/or p/n: TM70002-2 (red)
- Carry-All Bag (p/n: PC40000)
- Belt Accessory Pouch & Nylon Belt (p/n: PC30000)
- *Sondes:
- 512 Hz Sonde (p/n: TM50910)
- 512 Hz Micro Mini Sonde (p/n: TM50911)
- 82 kHz Sonde (p/n: TM-82kHz-T)
- 512 Hz Sonde (p/n: TM50910)
* XTpc must be equipped with this option before these accessories will operate. . Only one sonde frequency is available.
